Used 1994 Ford Mustang Cobra for sale in Glenolden, PA

1994 Mustang Cobra (modified)
Location: Just North of Philadelphia, PA
Asking: $10,999

- FRPP Boss 351 block, 427 cubic inches (9.5” deck) (specs below)
- Handmade engine bay panels
- Full wire tuck
- Edelbrock Victor upper and lower
- 90mm Lightening MAF (disconnected for speed density)
- Throttle Body 75mm
- Megasquirt PNP2, Mild drivability Tune by Fonse in NJ (400 rwhp)
- 47lb FRPP Injectors
- Aeromotive fuel rails
- Walbro 255 LPH in tank pump
- AN lines from firewall
- FRPP dizzy with steel gear
- MSD cap with Taylor wires
- MSD 6AL ignition
- Accufab BT180 Custom Headers (uncoated)
- 3” Custom exhaust with Borla Stinger mufflers
- Locally built t-5 transmission
- Centerforce DF Clutch
- FRPP 4.10 Gears
- Maximum Motorsports tube k-member, a-arms, coilovers, rear adjustable lower control arms
- Bilstein Shocks / Struts
- H&R SS rear springs
- Front’s: TSW BATHURST 19X8.5 5/114.3 with 265/30ZR-19 HANKOOK VENTUS V12 EVO2 XL
- Rears: TSW BATHURST 19X10.5 5/114.3 with 305/30ZR-19 HANKOOK VENTUS V12 EVO2 XL
- Custom fiberglass Cobra R style hood
- OEM Horizontal Export Tail lights
- Pioneer Double Din AVIC with customer sub enclosure, 8” Kicker SoloBaric sub and JL 300w Amp
- Auto meter lunar a-pillar gauges: oil pressure, fuel pressure, coolant temp.

Things to Note:

Air conditioning is removed however all parts retained and can be reinstalled if you wanted.

Original paint (with seasoned flaws) aside from new paint on the front bumper, hood, spoiler and tail lights.

Original wheels in hand with tires (about 60% tread). Also a bucket load of original misc. parts

I’m sure I missed something and will edit later but any questions feel free to email me!

Thanks!

Engine Specs:

• Engine type: 351 based small block Ford
• 535 engine hp @5600 rpm
• 545 lb.ft. torque @ 4500 rpm
• Displacement (cu in): 427
• Bore x stroke (in): 4.125" bore x 4.00" stroke
• Block: Boss 351 9.5 deck
• Crankshaft: SCAT Forged Steel
• Connecting Rods: SCAT forged steel I-beam connecting rods
• Pistons: Forged Mahle w/ floating wrist pin
• Camshaft type: Hydraulic Roller
• Camshaft lift (in): .576"/.600"
• Camshaft Duration (@.050 in): 242°/248°
• Cylinder Heads (p/n M-6049-Z304DA): Ford Racing Aluminum "Z" Cylinder Heads
• Valve size (in): 2.02 intake 1.60 exhaust
• Compression ratio: 10.5:1 (nominal)
• Rocker arms : Roller Rockers
• Rocker arm ratio: 1.65:1
• Vibration Damper – Ford Racing SFI Approved
• Valve Covers: Ford Racing cast aluminum black wrinkle finish 427 Cobra Script
• Oil Pan: Steel with deep front sump pan with windage tray / scraper - 7 quart capacity
• Water pump: included – long type - standard rotation