Used dump truck for sale in Lakeville, MN

selling my c6500 dump truck . details : 8.1 vortec with allison 4 speed automatic , 191k miles , 10k on new transmission, live hydraulic dump body 16' crysteel , gvw 26k non cdl , a/c .
recent repairs : power steering lines ( truck has no leaks anywhere) $2k into the bed , new bushings in cylinder, straightened sides and end gate , fixed broken side gate hinges , bed will dump 10 ton of granular material , all new brake lines and pads , rotors and calipers , new plugs and wires , tabs new to feb 2022
Pros : 1)this is a tuff truck , has never not started , any temperature , no matter how long it sits
2) pto and bed dump nicely , front tires pass d.o.t. and rears also are still very good 3) multi uses , i am a concrete contracter and use it for hauling forms , blacktop tear outs , hauling gravel or black dirt 4) nice looking truck still , no frame rot or body rot 5) goes 75 mph nice down the road 6) wheel hubs and bearings done at 170k miles , 7) the truck is actually a c7500 by the v.i.n. but badged as a 6500.so the payload is actually 8 ton no problem , however legally it is 7 ton 8) truck holds operating temp no matter how heavy a load or how hot of a day, it had never been overheated
CONS : the truck is starting to use some oil , which is common for a big block gas engine . i am adding a quart of oil for every day of work . it has been diagnosed as valve seals which is also common for this type of use. it does not appear to be low on compression so i have continued to add the oil for the last 2 years i have been using it. a valve job can run close to 3 grand , so my logic was to add the oil and run it until it was showing a sign of engine life failure . a new crate engine is around 5 grand and i would opt for that vs doing the valve job. the truck is a better hauler than it is a puller.
this has been my main rig since 2014 , i bought the bullet and bought a brand new f750 this year because i needed a 50k gross combined effort to pull around my poured wall forms. i have contemplated keeping this as a back up , but i have an f550 and dump trailer combo that is usually my 2nd option. this makes a good truck for a concrete guy or even a framer for demo and tearouts. cheap to maintain , a nice rolling dumpster . it has a tarp that is tired , but still works . it has 2 underbody tool boxes that also still work .